2
SAFETY
SAFETY
PRECAUTIONS
PRECAUTIONS
GB
Do not
allow anything to rest on the power
cord.
Do not
locate this LCD monitor where
the cord will be damaged by people walking
on it.
Do not
overload wall outlets and extension
cords as this can result in fire or electric
shock.
Do not
place this LCD monitor near any heat sources such as
radiators, heaters, stoves and other heat-generating products
(including amplifiers).
Do not
place this LCD monitor in direct sunlight.
Do not
place your LCD monitor on an unstable stand, shelf or
table. Serious injury to an individual, and damage to the LCD
monitor may result if it should fall. Your sales person can
recommend approved wall mounting kit. A special wall mounting
kit is available for this model.
This
LCD monitor should be operated only from the type of power
source indicated on the monitor or as indicated in the Operating
Instructions. If you are not sure of the type of power supply, con-
sult your sales person or your local power company
For added protection
it is strongly recommended that this LCD
monitor is supplied via a RCCB. Safety unit.
WARNING:
To prevent injury the LCD monitor must be securely
attached to the wall in accordance with the manufacturers installa-
tion instructions
.
Never
add accessories that have not been specifically designed
for this monitor.
Do not
place items such as vases containing liquid on top of the
monitor. Some internal parts carry hazardous voltages and con-
tact may result in an electric shock hazard.
Never
spill liquids of
any kind on this LCD monitor.
Do not
expose the LCD monitor to rain or use near water.
For example, near a bathtub, kitchen sink, in a wet basement, etc.
Do not
use immediately after moving the LCD monitor from a low
temperature to a high temperature environment, as this causes
condensation, which may result in fire, electric shock, or other
hazards. Before cleaning, unplug the monitor from the wall
socket.
Do not
apply liquid cleaners or aerosol cleaners directly onto the
LCD monitor. Use a damp cloth for cleaning.
This LCD monitor should have a minimum distance of 5cm away
from the wall and the monitor should have 10cm distance around
the top and sides
Do not
mount near an open flame source. Open flames must
never be used near this LCD monitor.
This
LCD monitor should not be built in or enclosed in any way,
heat build up will reduce the life of the monitor.
Always
mount using recommended and substantial fixtures and
fittings.
Installation
CAUTION: Please read and retain for your safety.
This unit has been engineered and manufactured to assure your personal safety, but
improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this monitor observe the
following basic rules for its installation, use and servicing.
Use
Important recycling information.
Your S
aville
product is designed and
manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic
equipment, at their end-of-life, should be
disposed of separately.
In the European Union there are separate col-
lection systems for used electrical and electronic
products.
Please help us to conserve the environment we
live in!
Note:
This symbol mark and recycle system are applied only to EU
countries are not applied to other countries of the world.
Important:
THIS PRODUCT MUST BE EARTHED
This equipment is fitted with an approved mains lead and an
approved non rewireable UK mains plug. To change a fuse in this
type of plug proceed as follows:
1.
Remove the fuse cover and fuse.
2.
Fit a new fuse which should be a BS1362 13 Amp A.S.T.A. or
BSI approved type.
3.
Ensure that the fuse cover is correctly refitted.
If the fuse cover is lost or damaged the plug must
NOT
be used
but replaced with a serviceable plug.
If the fitted plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place. If the mains plug
contains a fuse, this should have a rating of 13 Amp, ensure the
fuse cover is correctly fitted. If a plug without a fuse is used, the
fuse at the distribution board should not be greater than 13 Amp.
Note:
The severed plug must be destroyed to avoid a possible
shock hazard should it be inserted into a 13 Amp socket elsewhere.
The wires in this mains lead are coloured in accordance with the
following code:
Blue ------->
Neutral
Brown ---->
Live
Green and Yellow ----> Earth
1.
The Blue wire must be connected to the terminal which is
marked with the letter “N” or coloured BLACK.
2.
The Brown wire must be connected to the terminal with the
letter “L” or coloured RED.
3.
The Green and Yellow wire must be connected to the terminal
which is marked with the letter “E” or coloured GREEN or
GREEN and YELLOW.
Before replacing the plug cover, make certain that the cord grip is
clamped over the sheath of the lead - not simply over the wires.
Do not
attempt to bypass the safety purpose of the grounding
type plug.
THIS UNIT IS NOT DISCONNECTED FROM THE MAINS UNLESS
THE MAINS LEAD IS UNPLUGGED.
THE INSTALLER MUST MAKE SURE THE MAINS LEAD IS
EASILY ACCESSIBLE.
GB
