Power saving mode is enabled by default and will put the
scanner to sleep after 1 minutes inactivity. To wake up the
scanner press the trigger.
Demo
%P%D%T00
Disable
Scan to disable power saving
mode
Demo
%P%D%T01
Below are the barcodes to disable/enable power saving mode.
Power Saving Mode
Reading Mode
The default setting for reading mode is Single Scan. To choose
another mode please scan the appropriate barcodes below.
Motion Sensor: Full
Auto Mode
In this mode the scanner attempts
to decode when it senses motion.
Single Scan (Default)
In this mode the scanner attempts
to decode when the scan button
is pressed.
Demo
Demo
10
11
Transmission Speed
Transmission speed is dependent on your device. In order not to
lose data please choose the correct speed. Mid Speed is the
default.
Mid Speed
Transmission
(Default)
High Speed
Transmission
Low Speed
Transmission
Demo
%B%T%H
Demo
Demo
%B%T%L
Before connecting the scanner to another device it is
recommended you first unpair from the current device.
Go to the Bluetooth menu on your phone and select the
option menu for scanner from list of paired devices.
Choose “Forget this Device”/”Unpair”
Unpairing your device
12
1 Minute
Enter Power Saving Mode
after 1 minutes inactivity
5 Minute
Enter Power Saving Mode
after 5 minutes inactivity
15 Minute
Enter Power Saving Mode
after 15 minutes inactivity
30 Minute
Enter Power Saving Mode
after 30 minutes inactivity
Mobile Phone/Display Mode
This mode improves bar code reading performance with target
bar codes displayed on mobile phones and electronic displays.
Disable (default)
Enable
