3
Characteristics
The Get’r Done Series automatic welding helmet is equipped with a filter set that can become
dark. The filter is transparent before welding so that the operator may observe the work surface
clearly. The filter immediately darkens automatically when striking arc. When arc goes out,
the filter will become transparent again. The switching time from light to dark is about 0.0001
second. The switching time from dark to light may be set up within 0.1 – 0.9 second.
The mask is equipped with continuous darkness-adjusting unit, so the operator may select an
arbitrary dark shade number ranging from #9 to #13.
The Get’r Done Series automatic welding mask gives the operator permanent complete
protection against UV/IR: even in transparent conditions. The UV/IR protection level is up to
DIN15 at all times. The power is provided by solar cells, so user is exempted from changing
battery, turning on or off power and any other operation.
The mask is equipped with 2 sets of photo sensors to sense arc light. In addition, the mask is
also has an outer protection plate made of high polymer materials. The plate is wear-resistant,
thermo stable, and has no dregs-sticking, thus a very long service life.
Method of Operation
1.
Assemble the mask as shown in the construction and assembly figure (page #5)
2. The power supply
The power of the Get’r Done Series helmet is provided by solar cells with two lithium
batteries. Turning on or off is automatically controlled by a circuit. You can use this
helmet at any time you need and take it away after working without operating any key.
Use of this helmet is free from operating switches like a glass filter helmet.
3. Darkness selection
When striking an arc, the observing window darkens immediately. At this moment, the
operator adjusts the darkness knob 5 in the direction as shown by the arrow to select the
optimum darkness.
4. Delay time selection
By moving the DELAY selector knob (#7 on the rear of the cartridge), the time it takes for
the lens to lighten after welding can be altered from 0.1 to about 0.9 seconds.
Turn to MIN:
Shortens the time the lens takes to lighten after welding. The shortest
time is about 0.1 seconds depending upon the welding point’s temperature and the
shade set. This setting is ideal for track welding or production welding with short welds.
Turn to MAX:
Lengthens the time the lens takes to lighten after welding. The
longest time is about 0.9 seconds depending upon the welding point’s temperature
and the shade set. This setting is ideal for welding at high amperage where there is
an after glow from the weld.
Main Specifications
1. Filter dimension
110 x 90 x 8.5 mm
2. View area
97 x 47 mm
3. Light shade number
4
4. Dark shade number
9-13
5. UV/IR protection
upDIN15
6. Time from light to dark
1/10000 s
7. Time from dark to light
0.1-0.9s
8. Sensitivity/Delay
adjustable stepless
9. Power supply
solar cells
10. Operating Temperature
-10°C – 55°C (14°F – 131°F)
11. Warranty
One year
12. Grind function
Yes
Summary of Contents for Get'r Done Series
Page 8: ...8 NOTES ...
