8
ES-125 Owner’s Manual
Part No. 000703, 04-m07-2011
3. OPERATION
Operating from the COP Controls
Figure 2 shows the ES-125 car operating panel (COP). Note that the controls on
your unit may differ from those shown here.
Figure 2
To operate the ES-125 from the COP controls:
1
Insert the key into the key switch and turn it to the ON position to activate
the operating buttons.
2
Apply constant pressure on the UP/DOWN switch (as required) to move the
platform to the desired landing.
3
When the lift reaches the landing, release the UP/DOWN switch.
4
To prevent unauthorized use of the lift, take the key out when the unit is not
in operation.
5
Pressing the Emergency Stop button (optional) during travel will stop the
lift immediately. The Emergency Stop overrides the landing station controls.
Pull the Emergency Stop out to return the lift to normal operation.
Summary of Contents for ES-125
Page 15: ......
