Appendix A: Blueprint Basics
Note:
The following steps
assume
that a blank project is open within Blueprint and has been omitted as a step.
Creating Rooms
When a new project is started, a room is created with the name Room 1. Change the name to one of the rooms in the
system before adding more rooms.
1.
Click the plus at the bottom of the left hand room list.
2.
Enter a name for the room, and a room type.
User:
•
Room (Zone) contains an end-point to control.
•
Sources placed in user rooms are controllable only from that room.
•
Room (Zone) is selectable for control on UIs.
Global:
•
Room (Zone) does not contain an end-point to control.
•
Sources placed in global rooms are controllable from any room.
•
Room (Zone) is not selectable for control on UIs.
Adding Components
1.
Open the Component library.
Toolbar:
View> Show Component Library
2.
Use the Component Type, Control Type, and manufacturer selection boxes to locate the component, or use the
search box to locate by manufacturer or model number.
3.
Select the component from the list and drag onto the layout.
If a room selection box appears, select the room to place the component into.
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
009-1067-03 140806
25 of 30
