7.6.2. Assigning I/Os
In addition to assigning zones, inputs can be configured to appear only on certain outputs. This is useful to limit access
to a source that may not be desired to be accessible from all zones.
1.
Select the SmartAudio switch in the Blueprint layout
1.A. Open the inspector
Toolbar: View > Show Inspector
1.B. In the Show drop-down, select
Allowed I/O Paths
2.
Under each output, uncheck the box for the input that is not desired to appear.
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
009-1067-03 140806
16 of 30
