Box Contents
(1) SmartMediaPro 6 (SSP-0600-00)
(1) Installation Kit (075-0100-xx)
(2) 9-pin Screw Down Plug-In Connector (028-9353-xx)
(2) 6-pin Screw Down Plug-in Connector (028-9352-xx)
(1) 6 ft Power Cord (064-0079-xx)
(1) 3 ft Locking HDMI Cable (064-0394-00)
(2) Module Removal Tool (071-0268-xx)
(2) Rack Mounting Bracket (6U) (071-0192-xx)
(6) M5 x 8 mm Flat Phillips Screw (039-0180-xx)
(1) Quick Reference Guide (this document)
Specifications
Environmental
Environmental
Temperature
32° to 104° F (0° to 40° C)
Humidity
10% to 80% RH (non-condensing)
Cooling
25 cubic feet per minute (CFM) recommended.
Note that each chassis has fans pushing 36 CFM.
Maximum BTU
512 BTU/hr
Noise
Normal Operation condition: 52 dB Average
Dimensions and Weight
Dimensions and Weight
Height
5.21 in (13.23 cm)
Width
17.30 in (43.94 cm)
Depth
24.91 lb (11.3 kg)
Weight
Net: 21 lb (9.5 kg)
Shipping: 26 lb (11.7 kg)
Rack Space
3U
Power
Power
Power Supply
100 – 240V AC 3A 50/60 Hz
Maximum Power
200 Watts
Compliance
Compliance
Safety and
Emissions
FCC Part 15 | CE Mark | C-Tick | S-Mark
RoHS
Compliant
Minimum Supported Release
Minimum Supported Release
Savant OS
da Vinci 4.3.2
Front Panel
Standby
Power (hole)
Insert pin into hole
and hold for 5 seconds while
powered On by rear switch to place controller in
or out of
Standby
mode.
Power LED
Green:
System has adequate power and is
operating normally.
Red:
System is in standby mode.
O
ff
:
System is not receiving power.
Status LED
Green:
SSP-0600 is operating normally.
Green Flashing:
Controller has a DHCP or static
IP Address. Connecting to host.
O
ff
:
Unit is rebooting
Red:
Firmware update has failed and unit will be
rebooted.
Red Flashing:
No IP Address/Connecting to
Network.
Amber:
Firmware update in process.
Amber Flashing:
Controller has a link-local IP
Address and is connecting to the host. This
applies to controllers that are not connected to
an active router and may be connected directly
to a host.
Hardware Failure
Status
LED indication will be interrupted every 3
seconds with a solid
Red
indication. For example,
if the LED is flashing
Green
when a hardware
failure occurs, the LED will flash
Green
, solid
Red
,
etc., in 3 second intervals.
Video LED
O
ff
:
HDCP keys received are valid. Encrypted
video content remains protected.
Red Flashing:
HDCP keys are invalid. Encrypted
video content is unprotected. Video may still be
present as this state only indicates that HDCP
sync has been lost.
Fan LED
O
ff
:
Video output port is functional.
Green:
Video output port not functioning due to
an error.
Video Port
LEDs
O
ff
:
Video output port is functional.
Green:
Video output port not functioning due to
error.
Relay
Green
Indicates relay activity on the associated
ports on the rear of the unit.
Control Status
LEDs
RS-232/422/485, IR, and GPIO
Green
Indicates activity on the associated ports
on the rear of the unit.
SSP-0600-00 | 009-0404-05 | 150318
SSP-0600-00 | 009-0404-05 | 150318
45 Perseverance Way, Hyannis, MA 02601
Copyright © 2015 Savant Systems, LLC
1 of 4
savant.com
| 508.683.2500
SmartMediaPro 6 Controller
Quick Reference Guide
For Product Info
