Savant ProAV 16, Quick Reference Manual

Page: 1 / 2

PAV-AOM8C Quick Reference Guide | 009-1563-04 1 of 2 45 Perseverance Way, Hyannis, MA 02601
Copyright © 2021 Savant Systems, Inc. | 210621 Savant.com | 508.683.2500
Box Contents
(1) 16 Channel Audio Output IP Receiver (PAV-AOM8C-xx)
(1) Installation Kit (075-0195-xx)
(2) 3-pin Control Connector (028-9351-xx)
(1) 5V DC 3A Power Supply (025-0223-xx)
(1) Product and Regulatory Insert (009-1950-xx)
Specifications
Environmental
Temperature 32° to 104° C (0° to 40° C)
Humidity 10% to 80% Relative Humidity (non-condensing)
Dimensions and Weight
Height Width Depth Weight
Device
1.6 in
(4.15 cm)
8.5 in
(21.50 cm)
3.7 in
(9.33 cm)
1.4 lbs
(0.64 kg)
Shipping
2.2 in
(5.59 cm)
12 in
(30.48 cm)
7.3 in
(18.54 cm)
2.3 lbs
(1.05 kg)
Rack Space 1U
Power
Input 5V DC 3A
Maximum 15 Watts
Power over
Ethernet (PoE)
IEEE 802.3af
Networking
Supported
Standard
IEEE 802.1 AVB/TSN switches
IEEE 802.3 Ethernet
Regulatory
Safety and
Emissions
FCC Part 15 CE
C-Tick
UKCA
RoHS Compliant
Minimum Supported Releases
Savant OS
da Vinci 8.10.1, 8.10.2
da Vinci 9.1.1 and higher
Network Guidelines
For more information, see the Savant Device Networking Guidelines
on the Savant Customer Community .
Front Panel
Power Status
A B
A
Power LED
Green : System has power and is operating
normally.
Off : System is not receiving power.
B
Status LED
Off : Embedded processor is resetting, or is
powered up, and is booting the embedded
firmware.
Green : Host has established communications with
the embedded system.
Green Blinking : Embedded system is ready, but
no communication has been established with the
host.
Red : Host has determined the firmware needs to
be updated, but a problem occurred during the
process that will initiate a reset.
Red Blinking : Embedded firmware is running, but
has not received a DHCP IP Address.
Amber : Host is updating the embedded
firmware.
Amber Blinking : Embedded system has a valid
link-local IP Address and is connecting to the
host.
Installation
The PAV-AOM8C should be installed on a solid, flat, level surface. The
device will fit on a 1U rack shelf. The location should be dry, well
ventilated, and out of direct sunlight.
IMPORTANT! The PAV-AOM8C must be connected to a AVB
Switch. Also a Savant AVB audio input device is required.
Rack
The optional RMB-PAVAM2F-xx or RMB-PAVAM2-xx allows two
devices to be mounted side by side. This rack is compatible with all
standard 19-inch National Electrical Manufacturers Association (NEMA)
rack mounts.
The instructions below show the RMB-PAVAM2F-xx, both brackets
install the same way they just face different directions.
1. Align the bracket with the device’s mounting points.
2. Attach using the screws provided with the bracket.
Savant® ProAV 16 Channel Audio Output IP Receiver with Control
Quick Reference Guide