Copyright © 2018 Savant Systems, LLC
Wired DMX and 0-10V Lighting Controller Deployment Guide
009-1747-00 | 181116
3 of 29
Important Safety Information - Read First
Before installing, configuring, or operating any equipment and other,
Savant recommends that each dealer, integrator, installer, etc. access
and read all the relevant technical documentation. Savant technical
documentation can be located by visiting
. Vendor
documentation is supplied with the equipment.
Read and understand all safety instructions, cautions, and warnings in
this document and the labels on the equipment.
Safety Classifications In this Document
NOTE
:
Provides special information for installing, configuring,
and operating the equipment.
IMPORTANT!
Provides special information that is critical to installing,
configuring, and operating the equipment.
CAUTION!
Provides special information for avoiding situations that
may cause damage to equipment.
WARNING!
Provides special information for avoiding situations that
may cause physical danger to the installer, end user, etc.
Electric Shock Prevention
ELECTRIC SHOCK!
The source power poses an electric shock hazard
that has the potential to cause serious injury to installers and end
users.
ELECTRICAL DISCONNECT
: The source power outlet and power
supply input power sockets should be easily accessible to
disconnect power in the event of an electrical hazard or
malfunction.
Weight Injury Prevention
WEIGHT INJURY!
Installing some of the Savant equipment requires
two installers to ensure safe handling during installation. Failure to
use two installers may result in injury.
Safety Statements
All safety instructions below should be read, understood, and applied
under all relevant circumstances when working with this equipment.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of any polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If any
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect any power cord from being walked on or pinched; particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer,
following all relevant safety precautions for any such attachments/
accessories.
12. Disconnect any outlet powered apparatus from its power source
during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as a
damaged power supply cord or plug, liquid being spilled or objects
having fallen into the apparatus, the apparatus has been exposed to
rain or moisture, apparatus having been dropped, or other failure to
operate normally.
14. To completely disconnect this equipment from the AC mains,
disconnect the power supply cord plug from the AC receptacle.
15. For applicable equipment, use the included power cord with the
grounding prong intact to ensure proper grounding of the device.
16. For any hardwired or fixed in-wall apparatus, carefully follow all wiring
diagrams and instructions. All electrical wiring and servicing should
be performed by a properly licensed electrician.
