Savant IP-STUDIO46-2CH Series, Deployment Manual, Page: 7 / 20

Savant IP Audio Speaker and Soundbar Deployment Guide 7 of 20
Copyright © 2019 Savant Systems, LLC
009-1821-00 | 190509
Rear Panel
A
IR
(3) IR Ports
Uses 6-pin IR Connectors to send IR signals to control devices
with an IR input or IR receiver via an IR flasher (5V tolerant only).
See IR Wiring section for important
precautions regarding IR functionality before making any
connections.
B
RS-232
(2) RS-232 Ports
Uses 6-pin Screw down plug-in connection. Transmits and receives
serial data to and from serial controllable devices. For pin-out
information, refer to the RS-232 Wiring section below.
C
Ethernet
8-pin RJ-45 port
10/100 Base-T auto-negotiating port.
Supports Audio Video Bridging (AVB).
Ethernet
R
eset
S
ta
tus
Digital A
udio
In
IR
RS232
GND TX
RX
GND TX RX
2 1
- 1
+
- 2
+
- 3
+
100-2
40 V~ 50-60 HZ 2.2A
IP A
udio Soundbar
G F E
D
C B A
D
Power 100/240V AC (50/60 Hz)
E
Status LED
Green Blinking : Embedded system is ready, but no communication has been established with the host.
Green
: Host has established communications with the embedded system.
Red Blinking : Embedded firmware is running, but has not received a DHCP IP Address.
Red : Host has determined the firmware needs to be updated, but a problem occurred during the process that will initiate a reset.
Amber Blinking : Embedded system has a valid link local IP Address and is connecting to the host.
Amber : Host is updating the embedded firmware.
Off : Embedded processor is resetting, or is powered up, and is booting the embedded
firmware.
Hardware Failure : If a hardware failure occurs, the status LED indication will be interrupted every three seconds with a solid red
indication. For example, if the LED is blinking green when a hardware failure occurs, the LED will alternate between blinking
green and solid red at three-second intervals.
F
Reset
Resets the network.
Hold Reset Button for 5 seconds while powered On to clear network settings. Status LED will rapidly blink red when reset is
complete.
G
Digital Audio
In
Digital optical audio inputs (TOSLINK).
Supports up to 192kHz/24-bit digital audio in; PCM stereo format only.