Savant IP-STUDIO46-2CH Series Deployment Manual Download Page 4 | Manualshive

Page: 4 / 20

Savant IP-STUDIO46-2CH Series Deployment Manual Download Page 4

Savant IP Audio Speaker and Soundbar Deployment Guide

4 of 20

Copyright © 2019 Savant Systems, LLC

009-1821-00 | 190509

1. Introduction

This guide will guide the installer through the process of installing, configuring, and adding Savant IP Audio Speakers and Soundbars to a RacePoint

Blueprint™ configuration.

Before You Begin

Read through this document in its entirety and ensure that the following required items are available:

1. Savant IP Audio Devices .........................................................................................................................................................

2. Unique ID (UID) of the Savant IP Audio Speakers/Soundbars ...............................................................................

3. Savant Host (Smart or Pro) licensed and running da Vinci software ....................................................................

Requires da Vinci 8.10 or higher

4. Savant Development Environment (SDE/MacBook) ...................................................................................................

5. AVB Ethernet network meeting Savants requirements ..............................................................................................

See

Appendix A: Network Requirements

Deployment Steps

Follow these steps to successfully deploy Savant IP Audio Speakers and Soundbars. This page can be used as a checklist to record which steps have been

completed.

1. Review product specifications and connection details ..............................................................................................

See

Equipment Overview

2. Install the Savant IP Audio Speakers/Soundbars ..........................................................................................................

See

3. Add the Savant IP Audio devices into a RacePoint Blueprint® configuration ....................................................

See

«
...
2
3
4
5
6
...
»

Summary of Contents for IP-STUDIO46-2CH Series





















Reviews:

No comments