TE-BA-e-2020
7
6.5 Step 6.4 is repeated until the desired measuring accuracy is achieved.
7.
Battery replacement
7.1 When the battery symbol appears on the display, the batteries should be replaced.
7.2 The battery cover 4-8 is removed from the meter and the batteries are removed.
7.3 The batteries (4x1.5V AAA/UM-4) are inserted by observing the polarity when
inserting them.
7.4 If the device is not used for a longer period of time, the batteries should be removed.
8.
Adjusting foils
This instrument includes an adjustment foil set with different foils and measuring
ranges, but always covers the measuring range from 20 to 2000µm. These are also
available as optional accessories, article ATB-US07
9.
Correct handling of coating thickness measurement with external
sensors
The sensor is to be grasped at the lower shaft segment and is only lightly pressed onto
the test object.
The black, grooved shaft segment is mounted on a spring for movement. Through the
spring, the sensor head presses with a defined force on the test object and thus avoids
measuring errors.
Furthermore, measurement errors can be avoided if several measurements are taken
for practice when using the device for the first time.
Sensor (orange: F/ black: N)
Spring shaft for handling
Measuring
probe
