background image

FK-BA-e-2020 

 

Overloads  

Please prevent the measuring instrument from being overloaded beyond the specified 
maximum  load  (Max),  minus  any  tare  load  that  may  already  be  present.  This  can 
damage the measuring instrument (danger of breakage!). 
 

Attention: 

-  Make sure that there are never people or objects under the load, as they could be 

injured or damaged!  

-  The measuring  instrument  is not  suitable for  weighing  people,  do not  use  it as an 

infant measuring instrument!  

-  The measuring device does not comply with the German Medical Devices Act (MPG). 
-  Never operate the measuring instrument in rooms where there is a risk of explosion. 

The standard version is not explosion-proof.  

-  The  design  of  the  measuring  instrument  must  not  be  changed.  This  can  lead  to 

incorrect  measurement  results,  safety-related  defects  and  the  destruction  of  the 
measuring device.  

-  The measuring instrument may only be operated or maintained by trained personnel. 
-  The  measuring  instrument  may  only  be  used  in  accordance  with  the  described 

specifications. 

-  SAUTER must give written approval for any other areas of use / applications. 

 

Warranty 

Warranty expires in case of 
- not following our guidelines in the operating instructions 
- use outside the described field of application 
- Modifying or opening the device 
- mechanical damage and damage caused by agents such as liquids or liquids  
 have been caused 
- improper assembly or electrical installation 
- Overloading the measuring cell 

 

 

Summary of Contents for FK 10












Reviews: