Sauter GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: [email protected]
Tel: +49-[0]7433- 9933-199
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com
Instruction Manual
FH
Monitoring the test substances
8. CE Declaration of Conformity
The metrology features of the instrument and any possible
available adjusting weight must be checked at regular
intervals within the scope of quality assurance.
For this purpose, the answerable user must define a
suitable interval as well as the nature and scope of this
check. Information is available on the home page
(
www.KERN-sohn.com
) with regard to the monitoring of
instrument test substances and the test weights required
for this. Test weights and instruments can be adjusted
quickly and at a reasonable price in KERN’s accredited
DKD calibration laboratory (return to national normal).
Fundamental safety information
Do not use the hanging instrument to transport loads.
Prevent jolts, torsion and oscillation (e.g. by appending
slopingly) of all kinds.
Never use the hanging instrument over the maximum
permitted weight (!! Danger of breaking!!).
Always make sure that there are no living beings or
materials below the load that could be injured or damaged.
The hanging electronic instruments from the SAUTER
instrument are only suitable for hand-held use or use in a
test stand. They are not suitable for hanging from a
mechanical hook, e.g. a crane hook.
Observe the information in the operating instructions
Please read the operating instructions carefully before
erecting
and commissioning, even if you already have experience
with SAUTER instruments.
Staff training
The device may only be operated and looked after by
trained members of staff.
FH_SI-BA-e-1317
5
