sauter EY6LO00F001, Operating Instructions Manual

Page: 30 / 60

modu600-LO
Functionality and operation
30/60
R: 02, V: 01 D100408262
Channel
type DI/CI DI/CI/DO_OC DO_R UI AO UO
Selection
(BACnet
object)
Digital In
(BI, MI)
Counter In
(PC)
Digital In
(BI, MI)
Counter In
(PC)
Digital Out
(BO, MO)
Digital Out
(BO, MO)
0 (2)
… 10 V
Ni1000
Pt1000
R <2500

---------------
0 (4)
… 20 mA
Pot
0 (2)
… 10 V
0 (2)
… 10 V
0
… 20 mA
Table 2 Configuration options based on channel type
Value area
In this area, the effective value is normally displayed.
In the case of a binary or multi-state configuration, the logical value is displayed or, if it
exists, the text defined in the BACnet object (IAcTxt, AcTxt, StTxt).
From firmware version 1.2.3 onwards on the automation stations, the configured unit
from the assigned BACnet object is indicated for Analogue values, as well as the
calculated value instead of the measured value. If the automation station fails or the
channels are not configured, the measured value is displayed with the corresponding
physical unit:
•
0(2) … 10 V → V
•
0(4) … 20 mA → mA
•
Ni1000 →

•
Pt1000 →

•
R <2500

→

The icon indicates that the security value defined in CASE Engine is active. This
applies only if the station is no longer communicating with the module (absent, fault,
download ...). Normally this icon is not displayed.
The icon indicates that the output signal has been overridden, via either LOI or app.
The icon is also a button that can be focussed. In this case, when the button is
pressed the override is applied and the channel is reset to the AUTO mode (according to
the plan).
Important information
For binary and multi-state objects, the state texts are limited to 16 bytes. Depending on
the character, 1 to 4 bytes are required per character. In the detailed view, at least
9 characters are visible in the value field.