5/6
www.sauter-controls.com
Operation (user)
4
Enter time
4.1
See 3.1
Enter date
4.2
See 3.2
Select operating mode
4.3
Move the rotary switch to one of the positions for the operating mode;
see B3, B4, B5
Change room temperature setpoint for nominal
4.4
mode( )
1.
Set upper rotary switch (for 2nd HC, use
middle knob) to
2.
Press the input knob; room setpoint fl ashes
3.
Turn the input knob; change room setpoint
4.
Press the input knob; confi rm new value
Change room temperature setpoint for reduced
4.5
mode( )
Set rotary switch to
; room setpoint is
shown
For further steps, see 4.4.
Weekly switching programme(
4.6
)
The weekly switching programme repeats itself every week. It consists
of a maximum of 48 switching commands. The switching commands are
captive.
Call up the weekly switching programme (heating)
4.6.1
1.
Set upper or middle rotary switch to
2.
Press the input knob; weekly programme
is selected.
3.
Turn the input knob; select day of week (1 =
Monday, 2 = Tuesday , ..., 1 - 7 daily)
4.
Press the input knob; fi rst switching
command is shown
View switching command
4.6.2
07:00
Turn the input knob; each switching
command is shown. An empty switching
command is shown as ‚_ _ _ _‘
Enter switching command
4.6.3
1.
Turn the input knob until the next empty
switching command appears.
2.
Press input knob; new switching command
is shown.
3.
Turn input knob; time for the switching
command is changed
4.
Press the input knob; time for the switching
command is confi rmed
5.
Turn input knob; select operating mode for
the switching command
6.
Press input knob; operating mode is
confi rmed
Change/delete switching command
4.6.4
Show the switching command as described in the section entitled
‚View switching commands‘, e.g.:
1.
Press input knob; the switching command
is called up
2.
Turn the input knob; select whether to
delete (Clr) or change (SEt) the switching
command
3.
Press input knob; the selection is
confi rmed. If the switching command was
deleted, the next switching command will
be shown.
4.
To make a change, proceed as described
in the section entitled 'Enter switching
command'.
5.
And so on.
Return to automatic mode
4.6.5
Set rotary switch to ‹Automatic mode as
per switching programme›
Notes on the weekly switching programme:
1. A switching command can be valid daily (1-7) or on a specifi ed
•
day (Mon, Tue, etc.).
2. If there is a switching command on a particular day of the week
•
(Mon, Tue, etc.), the daily switching command (1-7) is not valid on
that day.
Calendar switching programme
4.7
Up to 20 switching commands with date and mode can be entered.
They apply for both heating circuits. The calendar switching
programme is called up in the same way as the weekly switching
programme for the fi rst heating circuit. If
is shown in the fi rst
operation on the display, turn the input knob until
appears in order
to access the yearly switching programme. Then press the input knob
to confi rm. Each command is processed in the same way as those for
the weekly switching programme.
Temporary temperature change (
4.8
)
1.
Set the rotary switch to
2.
Turn the input knob; set the duration of
the temperature change (h = hours, d =
days, t = time to next switching command;
minimum of 2 h)
3.
Press the input knob; duration is confi rmed
4.
Turn the input knob; select operating mode
(
or
)
5.
Press the input knob; confi rm operating
mode
N.B.: To cancel
, use the ESC key or set the rotary switch to
another
position.
06:40
06:40
- - - -
06:40
06:40
