AVM 104S...115S
51.362/5
Sauter Components
Coding switch for characteristics selection
Split-range unit. Accessory 0361529 001
The starting point U
0
and the control span
Δ
U can be set using the potentiometer. This makes it possi-
ble to activate several regulating units in sequence or in cascade using the controller’s control signal.
The input signal (partial range) is amplified into an output signal of 0...10V. This accessory cannot be
fitted in the drive. but should be located externally in an electric distribution box.
CASE Drives PC Tool, Accessory 0372462 001
CASE Drives enables all the actuator's parameters to be set and viewed on site. Connection is via a
serial port on the PC (laptop) and a socket on the actuator. The set comprises: software including
installation and operating instruction, fitting instructions, connectors, cable (1,2 metres in length) and
an interface converter for the PC. The application is designed for commissioning and service techni-
cians and for experienced users.
The last setting (i.e. whether with coding switch or CASE Drives) has priority. This setting is active
when the valve's running time or characteristic is changed via the coding switch. To ensure that the
settings with CASE Drives cannot be overwritten, the coding switch should be removed before setting
values through CASE Drives (special tool included).
7151362003 03
On
Off
Signal
Signal
v
Signal
v
Signal
Signal
v
Signal
Signal
v
Signal
v
= %
x
2
lin
= %
lin
v
v
v
v
v
Signal
Signal
On
Off
On
Off
On
Off
On
Off
B10705
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
Stroke
Stroke
Stroke
Stroke
Stroke
Desired
character.
curve
Switch coding
Characteristic
curve for valve
Characteristic
curve for drive
Effective on valve
Stroke
Stroke
Stroke
Stroke
Eq
u
a
l
pe
rc
e
n
ta
ge
Q
uad
ra
ti
c
Li
near
E
qua
l
pe
rc
en
ta
g
e
Li
near
= factory setting
Stroke
AVM 115S
