Page
13
of
45
4
Configuration the VAV Box and Actuators
4.1
Maintenance
Our actuators are maintenance-free. If necessary, please clean it with a dry cloth on the surface
cover.
4.2
Changing the Temperature Set-points And Limits
Changing the ASV305BF7XXXW VAV actuators user functions with EY-RU305F700XW series
thermostats are limited to active setpoint of the room and occupancy mode.
Quick start to change set points:
1.
Press Up or down to change the temperature setpoint.
2.
Press the [power]
button to change the occupancy mode.
To Enter the admin mode, press
the “UP” and “DOWN” button together and hold for 3
seconds.
You may need a password to enter.
4.3
Configuring the VAV Box Options
The configurations of the functions that are accessible through an EY-RU305F700XW series room
thermostat. The values and setting that are entered during the installation and commissioning of a
VAV terminal unit can be set via 3 ways. Typically, most of the functions do not need to change
after the installation and commissioning process.
To set up the configuration function, you will need the following items and information.
•
Details about the VAV terminal unit. Example size, inlet diameter and max/min airflow.
•
An EY-RU305F700XW series thermostats, BMS system or a PC to be use as a
configuration tool.
•
The Building automation system configurations and setting for the network.
Please take note that not all functions are available on every model of the ASV305BF7XXXW VAV
controller.
Summary of Contents for ASV3
Page 1: ...Page 1 of 45 MANUAL SAUTER ASV3 ...
Page 2: ...Page 2 of 45 ...
