Saunier Duval ThemaPLUS CONDENS F 30 E, Instructions For Use Installation And Servicing

Page: 10 / 54

9
Instructions for Use
10 Fault finding
If there is a fault, then a fault symbol
displays and the operating indicator on the
control panel flashes red.
Warning !
Never try to service or repair the appliance
by yourself and only start the appliance
once a skilled professional has repaired
the fault.
Symbol and
fault code Cause Corrective action
The operating
indicator is OFF.
Power failure Check the mains power supply is on and that
the appliance is switched on at the spur or
socket. The appliance starts automatically
once the power supply is on. If the fault
persists, please contact a skilled professional.
code F1, F4
Ignition fault Switch off the boiler
Wait 5 seconds and then start the boiler again.
If the fault continues, please contact a skilled
professional.
code F2, F3
Air flow failure
code F5 Overheating fault Please contact a skilled professionnal
Insufficient water
pressure in the system
(< 0.5 bar)
Open the blue tap situated under the boiler
until you obtain a pressure between 1 and 2
bars on the indicator. If you have to fill often
this might be caused by a leak in your system.
In this case, contact a skilled professional to
check the boiler and system.
Other defects Please contact a skilled professionnal