background image

In all our heater models there is a port for the connecting flue duct on top of and behind 
the heater. Close the unused port with the cap provided. With the heater there is also a 200 
mm connecting flue duct, which can be used for rear-mounted flue ducts. Do not push the 
connecting flue duct too far into the chimney – this will block air flow. The gap between the 
masonry chimney and connecting flue duct must be insulated with, for example, mineral 
wool.

The masonry connector is bricked into a hole made in the chimney at the correct height for 
connection to the flue duct port. The flue duct is connected to the heater, which is removed 
when the flue duct is inserted into the masonry connector. The optional flue duct feed-
through collar is used to give a finishing touch over the masonry work around the flue duct. 
The feed-through collar is made of noble metal.

Feed-through collar °115 mm

Heater installation

There are two ways to connect the connecting flue duct to the chimney. If the connecting 
flue duct is run from the top of the heater, the port in the back of the heater must be closed 
tightly with the cap provided (remove the cap on the top port).

Connecting the heater to a masonry chimney

Connecting flue duct 60°

Connecting flue duct 90°

Masonry connector

Connecting flue duct 

330-1000 mm

7

During installation ensure that the heater is fastened securely on its base, and that all the 
minimum safety distances listed in this manual are correct. 

HELO and VIKI heaters

Model R 

Flue port height to port center

 

 

from 

behind

on top w/ 60º

connecting flue duct

90º

upper tank + 60º

connecting flue 

duct

duct-mounted 

tank + 90º

connecting duct

Heat-retaining, 

ever ready

HELO UKKOTONTTU 

780 

-

Soapstone heater

HIIDENKIVI 

590 

1010 

840 

1630 

1470

Continuous heating

HELO 12 

550 

970 

800 

1590 

1430

HELO 16 DX 

600 

1020 

850 

1640 

1480

HELO 20 SL 

600 

1020 

850 

1640 

1480 

HELO 20 BLACKLINE 

600 

1020 

850 

1640 

1480

HELO 22 DX  

600 

1020 

850 

1640 

1480

HELO 28 DX 

650 

1070 

900 

1690 

1530

HELO 40 

930 

1380 

1200 

-

Heaters w/ water tank

HELO 18 ES BLACKLINE  

650 

1070 

900 

-

HELO 22 ES DX 

650 

1070 

900 

-

HELO 28 ES DX  

650 

1070 

900 

-

Cauldron

HELO PATA DX 
Connected from 

650 

1080 

920 

the top or rear

 

 

 

 

  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  

 

 

Note! These are measurements without adjustable feet

Summary of Contents for Helo 20SL














Reviews: