OPERATING INSTRUCTIONS FOR COLOR LIGHT THERAPY SYSTEM
1.
To activate the color light therapy system press “ADJUST” on the sauna control panel.
Upon turning the system on, the color light system will go into an automatically cycling
mode, changing color every 8 seconds:
2.
Press “ADJUST” 2X: Light system will glow GREEN
3.
Press “ADJUST” 3X: Light system will glow RED
4.
Press “ADJUST” 4X: Light system will glow BLUE
5.
Press “ADJUST” 5X: Light system will glow YELLOW
6.
Press “ADJUST” 6X: Light system will glow TURQUOISE
7.
Press “ADJUST 7X: Light system will glow VIOLET
8.
Press “ADJUST 8X: Light system will turn OFF
9.
Color Light System automatically goes off if Power is turned OFF.
WARNINGS AND SUGGESTIONS FOR USE
Please read carefully the following warnings, to reduce the risk of burns, fire, electric shock, or
injury to persons:
※
Do not put the sauna room in a moist environment.
※
Place room on level surface.
※
Do not repair the product by yourself. Contact the Saunatec National Customer Service
Center toll-free at 1-888-780-4427, or email at [email protected]
※
Do not disassemble the product by yourself except as indicated in the manual.
※
Do not spray the heater with water.
※
Do not use any sharp tools on or near the heaters (severe damage may result).
※
Do not use the product for any other purpose than originally designed and intended.
※
Do not directly touch the heater with hands or body for extended periods of time.
※
Do not use continuously for more than one hour.
IG 610-EX/E100-X-3
10
09/18/09
