background image

 å

Apply the WARNING LABEL (3L) to the TOP (E2). You should be able to read the label when the TV is removed from the 
unit. When the TV is in place, it should hide the label. Peel off  the backing and apply the label as shown in the diagram.

 å

NOTE: This is a permanent label intended to last for the life of the product. Once applied, do not try to remove it. 

 å

To insert the drawers into your unit, tip the front of the drawer down and drop the rollers on the drawer behind the rollers 
on the unit. Lift the front of the drawer up and slide it into the unit as shown in the lower view. 

 å

To make adjustments to the drawers, loosen the SCREWS in the DRAWER FRONT BRACKETS, make needed 
adjustments, and tighten the SCREWS.

Step 19

411626

www.sauder.com/services

Page 23

Place the roller on the SLIDE 
behind the roller on the RAIL.

WARNING

Never use this furniture with a TV that is too 
large or too heavy.  Severe injury or death can 
occur.  The TV and furniture will be unstable 
and may tip.

- The TV 

must

 weigh less than 

95 lbs.

- The base of the TV 

must

 be able to sit 

completely on this shelf.

3L

E2

Summary of Contents for Palladia Highboy 411626





































Reviews: