å
Fasten six ANGLE BRACKETS (27G) to the HUTCH ENDS (C and D).
Use six GOLD 9/16" LARGE HEAD SCREWS (5S).
å
NOTE: The ANGLE BRACKETS should not be even with the edges of
the HUTCH ENDS. The HUTCH MOLDINGS will rest on the edges of
the HUTCH ENDS.
å
Fasten the HUTCH MOLDINGS (BB) to the HUTCH ENDS (C and D).
Use six GOLD 9/16" LARGE HEAD SCREWS (5S) through the ANGLE
BRACKETS and into the HUTCH MOLDINGS.
å
NOTE: There are no pre-drilled holes in the MOLDINGS (BB). The
SCREWS will tighten into the grooves.
Step 6
418650
www.sauder.com/services
Page 11
C
27G
D
27G
Sur
face with
HIDDEN CAMS
Sur
face with
HIDDEN CAMS
These edges
should be even.
These edges
should be even.
BB
BB
(6 used)
GOLD 9/16" LARGE HEAD SCREW
(12 used in this step)
5S
