manualshive.com logo in svg

Sauder Executive Desk 408289, Instruction Booklet

Share
Download
Sauder Executive Desk 408289 Instruction Booklet Download Page 34

PASO 6

Fije los otros RIELES DE GABINETE NUMERADOS (CC y DD) 
a las otras superfi cies de los PARALES (C2 y D2). Utilice cuatro 
tornillos DORADOS de cabeza PERDIDA de 8 mm (3S) a través 
de los agujeros No. 1 y No. 4. 

PASO 7

Inserte cuatro ESPIGAS DE METAL (1R) en las RIOSTRAS (H2).

Inserte las ESPIGAS DE METAL (1R) sujetadas a los extremos 
de dos RIOSTRAS (H2) dentro de los agujeros del EXTREMO 
IZQUIERDO (B2) y del PARAL IZQUIERDO (C2).

Fije dos RIOSTRAS (H2) al EXTREMO IZQUIERDO (B2) y al PARAL 
IZQUIERDO (C2). Apriete cuatro EXCÉNTRICOS ESCONDIDOS.

Repita este paso para el EXTREMO DERECHO (A2), el PARAL 
DERECHO (D2) y las restantes RIOSTRAS (H2).

Precaución: Riesgo de daños o heridas. Los Excéntricos 
Escondidos deben apretarse completamente. Los Excéntricos 
Escondidos que no se aprieten completamente se afl ojarán y las 
partes pueden separarse. Para apretar completamente, atornille el 
excéntrico escondido 210 grados. 

PASO 9

Fije el VELO DE FONDO (F2) al PANEL SUPERIOR (E2). Apriete 
dos EXCÉNTRICOS ESCONDIDOS.

Fije el VELO DE FONDO (F2) a los PARALES (C2 y D2). Utilice 
cuatro TORNILLOS NEGROS DE CABEZA PERDIDA de 48 mm (2S). 

PASO 10

Fije los DORSOS (G2) a los EXTREMOS (A2 y B2) y a los 
PARALES (C2 y D2). Apriete ocho EXCÉNTRICOS ESCONDIDOS. 

PASO 11

Deslice las MOLDURAS DE EXTREMO* (Z) sobre los bordes con 
muesca de los EXTREMOS (A2 y B2) y de los PARALES (C2 y D2).

*Patente EE. UU. No. 5,499,886 

PASO 12

Fije las MOLDURAS DE FONDO (Y) a las RIOSTRAS (H2). Apriete 
ocho EXCÉNTRICOS ESCONDIDOS.

NOTA: No debe quedar ningún espacio entre las MOLDURAS DE 
FONDO y los DORSOS. 

408289

www.sauder.com/services

Page 34

PASO 8

Fije los EXTREMOS (A2 y B2) y los PARALES (C2 y D2) al PANEL 
SUPERIOR (E2). Apriete ocho EXCÉNTRICOS ESCONDIDOS. 

Summary of Contents for Executive Desk 408289









































Reviews:

No comments

Brands by name

Popular brands

Load more brands