manualshive.com logo in svg

Sauder Executive Desk 408289, Instruction Booklet

Share
Download
Sauder Executive Desk 408289 Instruction Booklet Download Page 27

Step 

408289

www.sauder.com/services

Page 27

Step 22

 å

To make adjustments to the drawers, loosen SCREW #4 (SCREW #3 in the small drawers) in the SLIDES a 
1/4 turn, then turn the CAM clockwise or counter-clockwise. Notice how the drawer raises or lowers as you 
turn the CAM. The higher the screw in the oblong hole, the higher your drawer front will be. The lower the 
screw, the lower the drawer front. By adjusting the drawers this way, it will help the DRAWER FRONTS line 
up better when closed. Tighten the SCREW when fi nished with adjustments.

 å

NOTE: Please read the back pages of the instruction booklet for important safety information.

 å

This completes assembly. To clean your unit, dampen a cloth with tap water and wipe.

 

  And to celebrate, why not share your success story?

Loosen screw #4 a 1/4 turn, turn the cam a 1/4 turn 
maximum in both the clockwise and counter-clockwise 
directions to make adjustments, and then tighten screw #4.

The higher the screw in the oblong hole, 
the higher your drawer front will be. The 
lower the screw, the lower the drawer front.

Cam

Summary of Contents for Executive Desk 408289









































Reviews:

No comments

Brands by name

Popular brands

Load more brands