Step 20
419401
www.sauder.com/services
Page 25
å
Carefully turn your unit over onto its front edges. Lay the BACK (J)
over your unit.
å
Make equal margins along the bottom and both side edges of the
BACK (J). Push on opposite corners of your unit if needed to
make it "square".
å
Fasten the BACK (J) to your unit using the NAILS (1N). The
BACK (J) will overlap the LARGE BACK (I).
å
NOTE: Be sure to tap NAILS into the holes that line up over
the SHELF (H).
å
NOTE: Perforations have been provided for access through the
BACK. Carefully cut out the holes needed.
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
Unfi
nished
sur
face
NAIL
(28 used in this step)
1N
These holes must line up
over the SHELF (H).
I
J
