å
Carefully turn your unit over onto its front edges. Unfold the
BACK (F) and lay it over your unit.
å
Make equal margins along all four edges of the BACK (F). Push
on opposite corners of your unit if needed to make it "square".
å
Fasten the BACK (F) to your unit using the NAILS (1N).
å
NOTE: Be sure to tap NAILS into the holes that line up over
the UPRIGHT (C).
å
NOTE: Perforations have been provided for access through the
BACK. Carefully cut out the holes needed.
å
Turn two BLACK 9/16" LARGE HEAD SCREWS (1S) into the short
slots of the FOOT BRACKET (6E).
Step 10
409047
www.sauder.com/services
Page 15
These holes must line up
over the UPRIGHT (C).
NAIL
(33 used for the BACK)
1N
BLACK 9/16" LARGE HEAD SCREW
(2 used for the FOOT BRACKET)
1S
F
6E
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
