30S
Step 13
408696
www.sauder.com/services
Page 17
VIEW THE T-LOCK BOX VIDEO
å
Fasten the DRAWER BACK (D67) to the DRAWER
SIDES (D83 and D84). Use four BLACK 1-9/16" FLAT
HEAD SCREWS (30S).
å
NOTE: Be sure the DRAWER BOTTOM (D703) inserts
into the groove of the DRAWER BACK (D67).
1
2
3
å
Insert the DRAWER SIDES (D83 and D84) at an angle
into the slot at each end of the DRAWER FRONT (K).
å
Slide the DRAWER BOTTOM (D703) into the grooves in the
DRAWER SIDES (D83 and D84) and DRAWER FRONT (K).
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
Groove
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(4 used in this step)
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
D83
D84
D703
D703
D83
D84
D67
D84
K
K
Unfi
nished
sur
face
With the palm of
your hand, tap the
DRAWER BOTTOM
down into the groove.
D83
