manualshive.com logo in svg

Sauder Aspen Post 427163, Manual

Share
Download
Sauder Aspen Post 427163 Manual Download Page 9

Step 3

427163

www.sauder.com/service

Page 9

2

 å

Carefully turn the MODESTY PANEL (M) over.

 å

Place the WASHER (82S) into one of the MOLDING 

CONNECTOR CLIPS (173M) as shown in the enlarged 

diagram. Using your hammer, gently tap on the  

WASHER to insert the MOLDING CONNECTOR  

CLIP into the hole in the MODESTY PANEL (M).

 å

Repeat this method to insert all of the MOLDING 

CONNECTOR CLIPS (173M) into the MODESTY PANEL (M). 

 å

Line up the groove in the MODESTY PANEL MOLDING (N) 

over the MOLDING CONNECTOR CLIPS in the MODESTY 

PANEL (M) and snap the MOLDING onto the CLIPS.

 å

NOTE: The MOLDING should be centered on the 

MODESTY PANEL. 

Surface 

without

 

TWIS

T-LOCK® 

FASTENERS

(5 used)

Use your hammer to tap the WASHER (82S) 

into the MOLDING CONNECTOR CLIP (173M).

82S

173M

Be sure the MOLDING 

CONNECTOR CLIP is 

parallel to the long edge.

173M

M

N

M

The groove 

is closer to 

this edge. 

Summary of Contents for Aspen Post 427163

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands