å
Carefully turn your unit over onto its front edges. Lay the BACK (F)
over your unit.
å
Make equal margins along both side and bottom edges of the
BACK (F). Push on opposite corners of your unit if needed to make
it "square".
å
Fasten the BACK (F) to your unit using the NAILS (1N).
å
NOTE: Be sure to tap NAILS into the holes that line up over the
upper SHELF/BOTTOM (D).
å
NOTE: Perforations have been provided for access through the
BACK. Carefully cut out the holes needed.
Step 11
414675
www.sauder.com/services
Page 15
These holes must line up over
the SHELF/BOTTOM (D).
Edge without holes.
F
NAIL
(18 used in this step)
1N
