Step 5
411197
www.sauder.com/services
Page 9
å
Turn four BLACK 9/16" FLAT HEAD SCREWS (QQ) into
the ENDS (A2 and B2) until the shoulders of the SCREWS
rest on the surfaces of the ENDS.
å
Slide the END MOLDINGS (M73) onto the ENDS (A2
and B2). Line up the grooves in the MOLDINGS over the
heads of the SCREWS in the ENDS.
A2
B2
M73
M73
Apply pressure with your hands
as you guide the MOLDINGS over
the SCREWS and onto the ENDS.
These edges
should be even.
These edges
should be even.
Shoulder
BLACK 9/16" FLAT HEAD SCREW
(4 used in this step)
