Step 9
401291
www.sauder.com/services
Page 14
å
Carefully turn your unit over onto its front edges and
tighten the eight HIDDEN CAMS in the BACKS (XX).
å
Then, lay the SMALL BACK (D2) over your unit.
å
Make equal margins along the top and both side edges of
the SMALL BACK (D2). Push on opposite corners of your
unit if needed to make it "square".
å
Fasten the bottom edge of the SMALL BACK (D2) to the
BACK (XX). Use six BLACK 9/16" LARGE HEAD SCREWS (RR).
Fasten the top and both side edges of your SMALL BACK to
your unit using the NAILS (UU).
NAIL
(12 used in this step)
UU
D2
XX
BLACK 9/16" LARGE HEAD SCREW
(6 used in this step)
RR
Cut-out are
used for lifting
Cut-out are
used for lifting
Start
Tighten
Arrow
Minimum
190 degrees
Caution
Risk of damage or
injury. HIDDEN CAMS
must be completely
tightened. HIDDEN
CAMS that are not
completely tightened
may loosen, and parts
may separate. To
completely tighten:
Arrow
Maximum
210 degrees
XX
Tighten eight HIDDEN
CAMS in the BACKS (XX)
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution