9
158085
www.sauder.com/services
BLACK 1--7/8” FLAT HEAD SCREW
(2 used for the
SKIRT
)
SKIRT (N)
Unfinished
surface
BOTTOM
MOLDING (L)
Flat
surface
Rounded
edge
-
Fasten the
SKIRT (N)
to the
BOTTOM MOLDING (L)
as shown in the upper diagram. Use two
BLACK 1--7/8”
FLAT HEAD SCREWS
through the
BOTTOM MOLDING
and into the pre--drilled holes in the
SKIRT.
NOTE:
Be sure the flat surface and rounded edge of the BOTTOM MOLDING are facing as shown. Be
sure the unfinished surface of the SKIRT is positioned as shown. Follow the diagram.
-
Fasten the
BOTTOM MOLDING (L)
to the
BOTTOM (E)
as shown. Use three
BLACK 1--1/8” PAN HEAD
SCREWS
through the
BOTTOM MOLDING
and into the pre--drilled holes in the
BOTTOM.
NOTE:
Be sure the rounded edge of the BOTTOM MOLDING is facing up as shown. Follow the
diagram. Do not overtighten the SCREWS.
-
Carefully turn a
FOOT SCREW (S)
a few turns into the two holes shown in the
BOTTOM MOLDING (L).
-
Next, turn a
FOOT (T)
onto the other end of each
FOOT SCREW (S).
Turn the
FEET
clockwise until the
FOOT
SCREW
is tight in the
BOTTOM MOLDING
and each
FOOT.
NOTE:
Do not overtighten the FOOT SCREWS.
FOOT (T)
FOOT
SCREW (S)
Rounded
edge
BOTTOM
MOLDING (L)
BOTTOM (E)
BLACK 1--1/8” PAN HEAD SCREW
(3 used in this step)
