Saturn ST-HT0475, Manual

Page: 4 / 35

4
damaged from fall. Please confirm the
heating unit is not damaged prior to
each use. Do not use the electric heater
if the heating element is broken. if the
Disconnect the power plug
when moving or cleaning this appliance.
When disconnecting the appliance
connection, first turn off the switch,
then unplug the plug. Do not yank the
power cable. powe
Demolition of the electric
heater with authorization is strictly
prohibited. Please look for professional
service personnel if the heater is
damaged. dama
Only specific personnel from
the technical service center may replace
the power cord of the product in case it
is damaged to ensure safety. is dam
Installation of the heater
directly under wall outlet is strictly
forbidden.
forb
Avoid the use of the heater if
children, animals or the disabled and
those who lack self-control are present
while nobody else is taking care of
them. them
The appliance should not be
available to the following people
(including children): those with physical,
sensory or mental impairments, or
those who lack experience and
knowledge unless they get custody or
instructions on the use of the product
from the person who is responsible for
their safety.
their
C hildren should be supervised
and ensured that they will not play with
this appliance. this
Do not share the socket with
other electrical appliances to avoid
current overload, or fire risks may be
caused by excessive load. caus
C AUTION: covering of the
cooling device is prohibited to avoid
overheating, or dangerous accidents
may be caused.
Service life
–
4 years.
INSTALLATION AND APPLICATION
OF THE HEATER
OF T
C heck whether the parts are
complete and the product is intact when
open the package.
open
If you want to use the electric
heater in a mobile way, please install
the rollers provided in the package.
Make sure the heater is correctly fixed
with the screws provided. Please make
sure the base is level, stable and clean.
Please note the safe distance mentioned
below.
STEPS FOR CASTOR INSTALLATION
1. Put the product upside down on a
soft cotton cloth or carpet.
2. Mount the stand in the corresponding
location of the lower part of the product
as shown above, and then fix the
randomly supplied screw at the bottom
of the product with a screwdriver and
tighten the screw.
OPERATION NOTICE OPER
Make sure the heater shell, line
and power plug are intact. and
C heck the rated voltage in the
model label of the heater is in line with
that of the outlet. Power outlet
requirements
are: voltage 220V,
frequency 50Hz, bearing
current ≥10A.
Do not power the heater on until the
requirements are met.
LED display
1. Display
2. Up Key
3. Down Key
4. Turn on/power key
5. Time Key