4
Fan Parts Identification
CAUTION
1. Do not plug the power cord into the wall outlet
until the fan has been completely assembled.
2. Use power source according to the electric
specifications in the rating label at the back of switch
box.
HOW TO ASSEMBLE
The only tool required for the assembly is a screw
driver.
1. Assembling the round base
Align the four holes in the base cover and the bottom base to the four holes in the outer
pipe flange.
1
Guard
2
Blade
3
Oasillation knob
4
Motor
5
Switch Box
6
Button switch
7
Switch box setting screw
8
Power Cord
9
Inner pipe
10
Outer pipe
11
Base Cap
12
Round Base
13
Hight Adjustment knob
14
Timer
5
At the same time, insert the bolts inside the four holes and tighten the flange to the base
cover and the bottom base with nuts. Then put the base cap over the outer pipe flange.
2. Mounting the switch box
Loosen the switch box setting screw by turning it anti-clockwise.
Place the hole in the bottom of the switch box over the inner pipe.
Turn the switch box setting screw clockwise to tighten it firmly.
3. MOUNTING OF THE FAN
Identification of the fan parts
1--Motor Housing
2--Rear Guard
3--Locking Nut
4--Blade
5--Blade Cap
6--Front Guard
7--Screw
4. Mounting the Rear Guard.
Mount the Rear Guard on to the Motor Housing
and secure it with the Locking Nut.
Summary of Contents for ST-FN8265
