8
- Empty the kettle.
Repeat this operation. The appliance is ready for use.
DESCRIPTION
1. Base unit with cord storage compartment
2. Body
3. Spout
4. Lid
5. Handle
6. Switch button
FILLING
- Remove the kettle from the base unit.
- Release and open the lid, and fill the container with water to the desired level, observing the
Min. and Max. markings. Before closing the lid and placing the container back on its base, ensure
that the appliance has not yet been switched on.
-
Do not fill the kettle with less than 0.5L of water (below “MIN” mark) to prevent it from operating
dry.
-
Do not fill the kettle with more than 1.7L of water (above “MAX” mark) to avoid overfilling and
water spilling out during the boiling.
SWITCHING ON
- After filling with water, place the kettle on the base unit.
- Connect the plug to the power supply and push switch button. The appliance will turn on, and
the indicator will light.
SWITCHING OFF
- When water begins to boil, the kettle will switch off automatically, and the indicator light will go
off.
Note:
This appliance has a safety system, which automatically switches the heating element off if
the appliance inadvertently has been switched on empty, or if it operates dry. In this case, let the
appliance cool down 10 minutes before filling with water again.
SWITCHING ON AGAIN
If the kettle has been switched off automatically, it can be switched on again after cooling for 15-
20 seconds.
CARE AND CLEANING
- Open the lid and pour out the water through the orifice.
- Always remove the plug from the socket and let the appliance cool down completely.
- Clean the outside of the kettle and the base unit with a soft damp cloth, then wipe with a dry
cloth. Do not use any abrasive materials.
- Remove scale regularly using special descaling agents available at the market, following given
instructions.
Filter cleaning
- Remove the filter out of the kettle.
- Place it under a jet of tap water and rub gently with a soft brush (not included).
- Return the filter to its place.
TECHNICAL DATA
Power:
2200 W
Voltage:
220-240 V
Frequency:
50 Hz
Current:
10 A
Summary of Contents for ST-EK8436
