Saturn ST-EC0182, Manual

Page: 6 / 15

5
Hot light
* On the cooking process or finish
cooking, this light will blink until
the top plate cool. So please don’t
touch the top plate during cooking
or after cooking.
Selection of Cookware
Material required:

Material:
Iron,aluminum,alloy,crock,pottery,casse
role,heat resistant pots and pans are
applicable.

Shape: Flat bottom cookware, its
diameter is the same with electric
ceramic cooker’s heating
zone(18cm),achieve the best cooking
result.

Noted: Metal objects,such as knives,
forks, spoons and lids should not be
placed on the heating area, they will
become extremely hot.

WARNING: Turn off the appliance to
avoid electric shock, if there are cracks
on the surface.
Maintenance and Daily Care
1. Remove the power plug prior to clean
the unit. Do not clean it until the surface
cools down.
2. Glass plate, panel and the shell:
①
Soft cloth for slight stain.
②
For greasy, dirt, blot by using a
clean damp cloth with neutral
detergent.
3. While the radiator-fan working, dust
and dirt would remain on the gas vent,
please clean it by
4. brush or cotton stick regularly.
5. Remember do not washing the unit
by water directly to avoid damaging.
6. To protect induction cooker, be sure
to have a good contact between plug
and socket before
7. using.
8. Do not pull out the power cord
directly during operation. To extend the
appliance's using life,,
9. press the "ON/OFF" button first, then
pull out the power cord.
10. In order to make operating time
longer, the fan would still working for
cooling the plate, is
11. better to plug out after the fan stops
working.
12. Please pull out the power cord and
put it away when not used for a long
time.
13. Some models have structural design
to against cockroaches, if needed, can
put something like mothball to expel the
cockroaches.
Troubleshooting and Treatment
During operations, if any error occurred, please check the following table before calling
for service. Below are common errors and the checks to perform.
Symptoms Check points Remedy
After connecting the
power and pressing
the “power” key, the
appliance has no
response.
Is the electricity in suspension?
Use after resuming the
electricity.
Is the fuse broken down?
Check the root causes
carefully. If the problem
cannot be fixed, please
contact Service Centre
for checking and
repairing.
Is the plug connected firmly?
Heating being
interrupted in
normal use and a
“Beep” will be
heard.
Incompatible cookware or no
cookware is used?
Replace compatible
cookware for the induction
cooker.
Is the cookware not
considerably placed form the
center of the heating zone?
Place the cookware at the
center of the defined
heating zone.
Is the cookware being heated
but continually being removed?
Place a cookware inside
the heating zone.
No operation during
the heating being in
use.
Is the cookware empty or the
temperature too high?
Please check whether the
appliance is being
misused.