Saturn ST-CF2965M, Manual

Page: 9 / 54

8
TROUBLESHOOTING AND
MAINTENANCE
Power cut off
If the internal temperature of the
freezer compartment is -18
℃
or less
when the power returns, your food is
safe. The food in your freezer will
remain frozen for approx. 16 hours with
the door closed. Do not open the freezer
door more than necessary.
The Fridge/Freezer is exceptionally cold
You may have accidentally adjusted the
thermostat control dial to a higher
position.
The Fridge/Freezer is exceptionally
warm
The compressor may not be working.
Turn the thermostat control dial to the
maximum setting and wait a few
minutes. If there is no humming noise,
it is not working. Contact the local store
where your purchase was made.
The Fridge/Freezer is not working
Check it is plugged in and switched on.
Check that the fuse in the plug has not
blown. Plug in another appliance, such
as a lamp, to see if the socket is
working. The Fridge/Freezer should be
placed in a well ventilated room with an
ambient temperature of between 16
℃
and 32
℃
. Leave the Fridge/Freezer for
30 minutes.
Condensation appears on the outside of
the Fridge/Freezer
This may be due to a change in the
room temperature. Wipe off any residue
of moisture. If the problem continues
contact the local store where your
purchase was made.
Gurgling, whooshing
These noises are caused by the
circulation of the refrigerant liquid in the
cooling system. It has become more
pronounced since the introduction of
CFC free gases. This is not a fault and
will not affect the performance of your
Fridge/Freezer.
Humming, purring or pulsating
This is the compressor motor working,
as it pumps the refrigerant around the
system.
SERVICING
This product should be serviced by an
authorized engineer and only genuine
spare parts should be used.
Under no circumstances should you
attempt to repair the appliance yourself.
Repairs carried out by inexperienced
persons may cause injury or serious
malfunctioning. Contact the local store
where your purchase was made.
When the appliance is not in use for
long periods, disconnect from the
electricity supply, empty all foods and
clean the appliance, leaving the door
ajar to prevent unpleasant smells.
Changing the internal light
1. Before carrying out the bulb
replacement always press and turn the
thermostat control to dial to
position “0”, then disconnect from the
mains supply.
2. Hold and lift up the light bulb cover.
3. Remove the old bulb by unscrewing it
in an anti-clockwise direction.
4. Replace with a new bulb (10W) by
screwing it in a clockwise direction
making sure that it is secure in the bulb
holder.
5. Refit the light cover and re-connect
your Fridge/Freezer to the mains supply
and switch on.
Reversing the Door Swing
Ensure the fridge is unplugged and
empty. We recommend that 2 people
handle the fridge during assembly.
To change the opening direction
yourself, please follow these
instructions:
Tools required: Philips style screwdriver/
flat bladed screwdriver/ Hexagonal
spanner.
1. a. Remove all the cover’s screws first.
b. Lift the top cover away from the
Fridge.