Saturn CS-09, Manual, Page: 6 / 17

10
down rapidly by the cold wind and it
looks like the fog.
Mist is emitted during heating operation. This generate due to moisture in
defrosting process.
Low noise can be heard during operation. • A low hissing sound is caused by the
refrigerant flowing.
• A low squeak sound is caused by the
deformation of plastic due to temperature.
In case the following situation, please immediately stop all operations and cut off the
power supply, then contact with service centre.
• The fuse and switch often breaks.
• Carelessly splash water or something into air conditioner.
• Unusual noise can be heard during operation.
• Electrical wiring and power plug are very hot.
• Wind blowing from the outlet smells terrible during operation.
• The Run light or other display flashes rapidly and keeps flashing after repluging.
Installation Guide
¨
Guide for customer
• The installation must be done by professional referring to the “Installation
instructions”.
• The wiring must be done by qualified electrician according to the electrical safety
requirements.
• The customer should have a qualified power supply which coincides with the tag of
air conditioner, the normal voltage should be in the range of 90-110% of its rated
voltage.
• The air conditioner must be well grounded, the switch of the main power of air-
conditioner must be reliably grounded.
• If your air conditioner is not fitted with a supply cord and a plug, an all-pole switch
must be installed in the fixed wiring and the distance between contacts should be no
less than 3.0 mm.
• If your air conditioner is permanently connected to the fixed wiring and have a
leakage current that may exceed 10 mA, leakage protector must be installed in the
fixed wiring, operating current of which shall not exceed 30 mA.
• The power supply circuit should have leakage protector and air switch of which the
capacity should be more than 1.5 times of the maximum current.
¨
Notices
• The air conditioner must be installed on well strong supporter.
• The appliance shall be installed in accordance with national wiring regulations.
• Fix the machine firmly, otherwise it will produce abnormal noise and vibration.
• Install the outdoor unit in the place where it wouldn’t disturb your neighbour.
11
• The method of connection of the appliance to the electrical supply and inter
connection of separate components, please see the electric connection elements chart,
which stick on the machine.
• If the power supply cord is damaged, it must be replaced by the manufacture or its
service agent or a similar qualified person.
• After installation, the power plug should be easily reached.
Technical Data:
Maximum Power: 2.3 kW
Rated Voltage: 220-230 V
Rated Frequency: 50 Hz
Set
HOUSEHOLD SPLIT-SYSTEM/SERIES INVERTER…..1
INSTRUCTION MANUAL…………………………….....1
WARRANTY BOOK………………………………………1
PACKAGE….…………………...........................................1
ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the environment!
Please remember to respect the local regulations: hand in the non-
working electrical equipments to an appropriate waste disposal center.
The manufacturer reserves the right to change the specification
and design of goods.