Trailer Wiring
Additional wire length has been provided for connecting
trailer wiring to your vehicle. A loop of five wires is
stored below the jack, which is located on the driver’s
side of the cargo area. The wires are fused in both
the underhood and instrument fuse block. See
“Instrument Panel Fuse Block” and “Underhood Fuse
Block” under Fuses and Circuit Breakers on page 5-98.
The wires don’t have a connector and should be
wired to the trailer by a qualified electrical technician.
The technician can use the following chart when
connecting a trailer wiring harness to your vehicle.
•
Yellow: Left Turn Signal
•
Brown: Parking Lamps
•
Light Blue: Stop Lamps
•
Black: Ground Wire
•
Dark Green: Right Turn Signal
When connecting a trailer harness, be sure you leave it
loose enough so the wiring does not bend or break,
but not so loose that it drags on the ground. Store
harness below jack in the cargo area when it is not in
use. Wrap the harness together and tie it neatly so it will
not be damaged.
4-62
Summary of Contents for 2004 Vue
