4
2
Quick Reference
Green
Red
Connectivity
Switch
Comment
Fast, continuous blinking between green
and red.
N/A
N/A
When device is in the Factory Reset state
Four blinks of red, four blinks of green,
repeating.
Connected
N/A
When device is set to
Locate
Mode
Off
Off
Not connected
Open
Not Connected, switch open
Off
On
Not connected
Closed
Not Connected, switch closed
Short blink every 4s
Off
Connected
Open
Connected, switch open
Short blink every 4s
On
Connected
Closed
Connected, switch closed
On (up to 10s)
Off
Attempting to connect
N/A
While device is attempting to join network
Fast Blink (3s)
Off
Joined or re-joined
successfully
N/A
Indicates successful network join or re-join attempt
Off
Fast Blink (3s)
Failed to join or re-join
N/A
Indicates unsuccessful network join or re-join attempt
Slow blink between green and red at ~1Hz
Connected
N/A
Indicates that the device is being remotely updated
Feature Name
Button Action
Resulting Action
Association
Join
5 second press
and release
Device will join any ZigBee HA network with ‘Permit Joining’ mode enabled. When the button is pressed the button
colour will change to yellow, and then begin to rapidly blink green once is has been held long enough to trigger an
Association Join. At this point the button should be released, and the button will shine solid green while it scans for a
suitable network. The button will then blink green if the join operation is successful, or blink red on failure.
Factory Reset
Press and hold
button for at least
10 seconds
Returns the device to its factory reset state. When the button is pressed, the button colour will change to yellow, and
after 10 seconds the button will begin to rapidly blink red indicating that the device will return to factory reset state.
The user should wait about 5 seconds before attempting another Association Join following a Factory Reset.
Manual
Switch
Press the button
briefly (<1 second)
Manually switches the device relay. Has no effect on non-switching variants of this device.
SS9005 Mini Three Phase Meter – Std HA Release
Button LED Indication Quick Reference
Button Command Quick Reference
Note: The LEDs will automatically dim to one
third brightness after 15 seconds of inactivity.
