~ 8 ~
1.
Connect your HDMI or DVI source (such as a Blu-ray Disc player) to the transmitting unit
HDMI-EXT-0103C-TXIR.
2.
Connect the IR blaster to the transmitting unit HDMI-EXT-0103C-TXIR, and make the IR blaster
directly point to the IR sensor of the HDMI source device(s).
3.
Connect your HDMI or DVI display (such as a LCD or plasma HDTV) to the receiving unit
HDMI-EXT-0103C-RXIR.
4.
Connect the IR receiver to the receiving unit HDMI-EXT-0103C-RXIR, and make the IR receiver
directly point to the user.
5.
Connect two Cat-5/5e/6 cables between the transmitting and receiving units via
A/V SIGNAL
and
CTRL
CHANNEL
ports respectively.
6.
Make sure your Cat-5/5e/6 cables are tightly connected and not loose.
7.
Plug in 5V DC power supply unit to the power jack of the receiving unit HDMI-EXT-0103C-RXIR.
8.
If you see flickering or blinking image on the display, try to adjust the rotary control switch to
improve the cable skew. 0 stands for the strongest HDMI signal level for longest possible
transmission length while 7 stands for the weakest HDMI signal level for short transmission length.
Try adjusting the signal level from 7 to 0 to find the optimal setting for the HDMI over CAT5
transmission.
Hardware Installation
