26
Press
to confirm and set Timers.
2) Timer Setting
In this mode, you can do pre-set 14 different Timers simultaneously.
►
CH. Type : TV or Radio
►
CH. Number : Channel number
►
CH. Name : Channel name
►
Start Time : Turn on time when standby mode, or channel changing time
during watching other channel.
►
Stop Time : Turn off time.
►
Status : Inactive mode (No)/ Active mode(Once, Daily, Weekly)
Press
to select
Timer #(number)
and press
.
Determine
CH. Type
by selecting
TV
or
RADIO
with or .
Move to
CH. Number
with
and enter channel number.
Move to
Start Time
with
and enter the time to power-on or switch
on with Numeric buttons.
Move to
Stop Time
with
and enter the time with numeric buttons.
Move to
Status
with
and set
No, Once, Daily
or
Weekly
with
or .
Note : 1. Without Status being activated, Timer does not work.
2. If prior time is entered than current, Timer does not work.
3. You can pre-set 14 Timers simultaneously. Regardless of
number of Timer, Timer will work in sequence of time
sequence.
4. While Timer is working, The RCU will not operate except
power button. If you want to operate RCU, simply press
POWER just one time, then the RCU will be activated.
There are 2 kinds of Timer setting method.
►
Manually at the Main menu : By following above instruction.
►
Automatically at the EPG menu : By selecting the actual
program (Refer to page 29)
8-4. Parental Control
There are various locking mode in this Receiver. You can lock the receiver
itself or some specific parts in order to protect your preference.
You can also change the password in this menu.
27
1) Age Limit
This sub-menu allows you to set the age limitation for parental locking
and protect children from viewing programs unsuitable for their age.
►
Select
System
→
Parental control
with
or
in the main menu
and press
.
►
Select
Age Limit
and Press or to select age restriction.
Note : Age limit can be applicable only for the signal which carries
age limit information.
2) Lock Receiver
Select
Lock Receiver
with
or
and select
YES
or
No.
If
Yes
, you may have to enter password when you power on the receiver.
3) Lock Favorite Group
You can lock a certain Favorite group you edited in order not to access.
Select
Lock Favorite Group
with
or
and select a certain
favorite group you want to lock, and press
.
4) Lock Channel Editing :
You can lock the channel editing menu.
Select
Lock Channel Editing
with
or
and select
YES
or
No.
If
Yes
, it will be impossible to use channel editing menu without password
5) Lock Installation :
You can lock the installation menu.
Select
Lock Installation
with
or
and select
YES
or
No.
If
Yes
, it will be impossible to use
install
menu without password.
6) New Password :
You can change 4-digit password
7) Verify Password
9. Transponder
In this menu, you can Edit(add or modify) and delete certain transponders.
After add or modify TP, you can also scan channels of the edited TP.
9-1. TP Add/Modify
After executing
LNB Configuration
or
Motor Setup
procedure in the
Install
mode, press
Yellow
button to enter
Scan
mode.
You can also come this mode in the main menu.
Press menu button on the RCU and select Install
→
Scan, and
press
.
