9
of the plug-in type probe.
If a probe is connected only to CH2, logging cannot be started. Be
sure to connect the probe to CH1 first.
③ Connecting to the PC
Connect the unit to the computer using the provided USB cable.
The settings should be done through the dedicated software. For details,
refer to the software instruction manual.
④ Installing the datalogger
Notes:
・ When hanging the unit on a wall, install screws on the wall or pole, pull
out the wall-mount hooks from the back of the unit and use them to
hang the unit on the wall or pole.
・ Upon completion of installation, slightly move the unit from side to side
to check that it will not fall. Do not pull the unit mounted on the wall
unnecessarily. Doing so may cause the mounting hooks to come off.
Installing the unit on the wall
Use M3 screws or the like and install the unit by referring to the figure
below.
・Be sure to securely install the unit to prevent it from falling.
⇨