1
Thank you for purchasing the Precision type Digital Thermometer Model SK-810PT
- This product is designed to measure temperature connecting with various optional PT (platinum
resistance temperature detector) probes. Do not use it for other purposes.
- Read this manual thoroughly before using the thermometer. Keep the manual in a safe place for future
references whenever necessary.
Warning
This thermometer is not explosion-proof. Never use it in an atmosphere containing flammable gases.
Beware of explosion!
There is a risk of explosion. Take extreme care.
For any inquiries, contact us or the dealer from which the unit was purchased.
Caution
Be sure to observe the following precautions in order to use SK-810PT correctly.
- Do not use this unit as a clinical thermometer.
- This SK-810PT is a precision instrument. Do not drop this unit or apply impact to it.
- Never disassemble or modify this unit. Doing so may result in failure.
- Do not use this unit in water.
- Do not use this unit in a place exposed to direct sunlight or near heating equipment. Doing so may result
in deformation of the casing or failure.
- Do not use this unit in an environment where electrical noise is generated. Doing so may result in
unstable display or larger errors.
- Do not forcibly pull, bend, or bundle the sensor cord. Placing a heavy object on the sensor cord, heating
or scratching the cord may also damage it.
- If this unit is not to be used for a long time, always remove the batteries from the unit. Otherwise, the
batteries may leak fluid, resulting in failure.
- Do not wash or wipe this unit with alcohol, thinner, or other solvents. Also, do not wash it in water. If the
unit becomes dirty, wipe it with a tightly wrung cloth that has been dipped in warm water with neutral
detergent.
- Be sure to use this unit within the specified measurement range. Using the unit outside the specified
measurement range will result in failure or damage.
- Inside of the connector is not waterproof structure. Do not use the connector in wet condition.
- If this unit is left in a car in the hot summer sun, it will become extremely hot and may malfunction. Do not
leave the unit in such a place.
** For repair or calibration, contact us or the dealer from which the unit was purchased.