SATO DR308e, Quick Manual

Page: 13 / 116

13
English
6
Head lock lever
F
Platen roller
(consumable part)
E Thermal head
(consumable part)
C
Pitch sensor
Interior
Name and Function of Controls
1
Cover
Open and close this cover to load the paper, ribbon
and other items.
2
Display panel
Displays an error message and instructions.
3
Power ON/OFF switch
Turns power ON or OFF.
4
Ribbon take-up spindle, Ribbon supply spindle
Used to load the ribbon.
5 Roll media supply spindle
Used to load the roll media.
6 Head lock lever
Used to open and close the thermal head.
7 Roll media stopper
Set to meet the size of the label used.
8 Boss
Attach the boss to suit the size of the paper core used.
9 AC input power terminal (power connector)
Used to connect the power cord.
0
Keypad (simple input device) connection terminal
Used to connect the optional keypad (simple input device).
A
Interface slot (option)
Optional interface slot for connection to a PC or other device.
B
Sliding guide
Used to hold down the paper.
C
Pitch sensor
Detects the holes in the tag stock so that the paper
can be cut off by the cutter.
D
Pitch sensor guide
Adjustment knob used to align the position of the
paper sensor with the holes.
E
Thermal head
This component is used to print on the paper. Perform
maintenance at regular intervals.
F
Platen roller
This roller feeds the paper. Perform maintenance at
regular intervals.
G LINE key
Used to start or stop printing, and also to toggle
between the on/off settings for data transmission and
reception.
H FEED key
Press once to feed one blank label.
I STATUS (LED)
Lights or flashes to indicate the printer status.
J External connector terminal
Interface connector for external signals.
Dispenser sensor level
adjustment
Adjustment of option
positions (cutter position,
dispenser position, and
tear-off stop position) Factory offset
adjustment I-mark Gap DIP switch* Print start position
adjustment
Print density
adjustment
Jump hole sensor
adjustment
Connection terminal for
sensor level adjustment jig
*1: Download mode, 2: Maintenance mode, 3: Printing cut mode selection, 4 to 8: Unused