Page 8
CL4XXe Rotary Cutter Installation
Sato Industrial Bar Code Printers
Label Cutter Kit Installation - Rotary Type
DISCONNECT THE
CABLE FROM THE
DISPLAY PANEL
PC BOARD.
DISCONNECT THE
OPPOSITE END
FROM THE
POWER SUPPLY
AT CN2
ROUTE THE CABLES FROM THE CUTTER
AND ACCESS HOLE DOWN BEHIND THE
MOTOR AND UNDER THE BELT. ATTACH THE
CONNECTOR END "CUTP" TO THE POWER
SUPPLY AT CN2
AFTER THE CABLES HAVE BEEN PROPERLY
ROUTED AND ARE CONNECTED, SECURE
THE CABLES TO THE PRINTER WALL WITH
CABLE HOLD DOWN SUPPLIED IN THE KIT
CABLE CONNECTOR FROM
CUTTER TO "CN10" ON
MAIN PC BOARD
Figs. 11
ATTACH
REPLACEMENT
DOOR
Fig. 12