SATO 8312-00 Instruction Manual Download Page 2

 

 

Introduction 

 
Thank you for purchasing the Heat Stress Monitor Model SK-170GT. 
This product measures WBGT index*, air temperature, globe temperature, and humidity. Do 
not use it for other purposes. 
* The WBGT (Wet Bulb Globe Temperature) index is a general heat stress index used in ISO 

7243 

Hot environments - Estimation of the heat stress on working man, based on the WBGT 

index

 and its application in Japan, JIS Z8504. 

The WBGT index is often used in health and safety guidelines for workplaces and sporting 
situations. 

Please read this manual thoroughly before using the instrument and keep the manual in a 
safe place for your future reference. 

 

PRECAUTION

 

Make sure you fully understand the following facts about this instrument before use for proper 
usage. 

 

This instrument 

does not

 prevent heat stress. 

 

This instrument indicates WBGT index which can be used as guidelines for heat stress. 

 

Heat stress is caused not only by high  temperature ambient, but also by one’s health 
condition, one’s adaptability to hot environment, etc. 

 

WARNING 

Never use this instrument in an atmosphere exposed to inflammable gases as it 
may explode. 
* If there is anything you are not clear about this instrument, contact a dealer or 

us. 

 

CAUTION 

Please keep the followings for proper use of the instrument. 

 

Use this instrument in a normal atmosphere only. 

 

This instrument is not waterproof. Never let the instrument to get wet. 

 

Using the instrument out of its measuring range can cause malfunctions. 

 

Never directly touch the humidity sensor. 

 

If the instrument gets condensed with moisture, turn the power off immediately and let it 
dry naturally before using it again. 

 

If the instrument is used in an electrically noisy environment, the instrument could show 
unstable values and errors in accuracy. 

 

Never disassemble or alter the instrument to avoid any malfunctions and damages. 

 

This is a precision instrument. Be careful not to drop or give shocks to it. 

 

Summary of Contents for 8312-00

















Reviews: