10
Maximum and Minimum Functions
Maximum (MAX) and minimum (MIN) measurement values can be displayed while taking
measurement.
①
Press the MN/MX/RST key in the measurement mode. The display changes cyclically.
Measurement mode
MIN
MAX
②
Press the MN/MX/RST key for more than 2 seconds to reset the MIN/MAX values. They
can be also cleared by turning the power off.
Note
: The MIN/MAX values are constantly updated in all modes, except when the hold
function is activated.
Alarm Function
The alarm is triggered with sound of buzzer when the WBGT index exceeds the set value.
Note that this alarm cannot be set for air temperature, globe temperature, or humidity.
Note:
This instrument is automatically turned off if it is not in operation for 20 minutes. In
case of using it for more than 20 minutes, release the auto power-off function.
* Refer to “Auto Power-Off Function” for details.
Note
: The buzzer does not work when MIN/MAX values are displayed.
⚫
How to Set Alarm Function
①
Press the MODE/Up key to switch to the WBGT mode.
②
Press the SET key for more than 2 seconds to start the alarm setting mode.
③
Press the MODE/Up key to increase the value of the blinking digit.
Press the IN_OUT/Next key to change the digit to be edited.
Note:
Set the alarm within the range of 20.0 to 49.9°C.
It is not possible to disable the alarm function.
④
Press the SET key for longer than 2 seconds to confirm the setting.
Notice
: If you turn the power off before confirming the alarm setting, the instrument recalls
the last fixed value for the alarm.
Auto Power-Off Function
If the instrument is not in use for more than 20 minutes, the power is automatically turned off
for power saving purpose.