SATO KEIRYOKI SK-1110, Instruction Manual, Page: 10 / 16

8
Average display function
The SK-1110 displays the average temperature among the
temperatures measured since the AVG key was pressed.
These values are obtained by summation averaging (up to
about 4 hours).
While the AVG function is activated, the current temperature measured is displayed in the
upper display and the average temperature is displayed in the lower display. Pressing the
AVG key for two seconds or more will release the AVG function.
- While the AVG function is activated, the Auto Power-off function is disabled.
- If the MX/MN key is pressed while the AVG function is turned on, the unit moves to the
MAX/MlN function mode.
Memory function
By pressing the MEM key, the unit can store in the memory the current temperature
measured or other readings of other functions (MAX/MIN, AVG, OFFSET) currently being
displayed.
Up to 150 readings can be stored in the memory.
- The unit cannot store the readings when they are held by the HOLD function.
1. Storing data in memory
If the MEM key is pressed while measuring, the MEM mark
lights in the display to indicate that the measurement is being
stored in the memory. Also, the memory data number is
displayed when storing is complete.
- No memory data is displayed if there is no data in the memory.
- If there is already data in the memory, the newly stored data is assigned a consecutive
number from the number last stored in the memory.
- If there are 150 readings already stored in the memory, the FULL mark is displayed instead
of the memory data number to indicate that no data can be stored.
2. Displaying the data stored in memory
While measuring, pressing the READ key displays the READ mark and the data stored.
To view the other data, change the memory number by using the
▲ / ▼ key
Pressing the READ key again returns to the measurement mode.